Millermatic Direct
The One-Stop Shop for Millermatic Products
Millermatic 180 Review
Miller Millermatic 212 907405 Auto-Set Mig Welder 230V
$2,052.00
Price: $1,795.00
You Save: $257.00 (13%)
Price: $1,795.00
You Save: $257.00 (13%)
© Millermatic Direct 2012
You might also like...
Value for money is usually high priorty when it comes to purchasing new tools. When it comes down to it, This little unit is the best there is for the price.
It has high-quality execution for jobs such as gate and fence weldings and many, many more. I thought I might need more force to do these jobs. Nonetheless it effortlessly meets my needs. It can without difficultly weld all day on 120volt power no trouble.
The Autoset contains a clever control that sets the welder automatically to the correct settings. Auto-Set gives you an all-in-one MIG, so you won't need to estimate anymore. The 180 Autoset can Weld the thickest material, with the highest output in its class! You can expect to weld up to 5/16 inch in a single pass.
It has high-quality execution for jobs such as gate and fence weldings and many, many more. I thought I might need more force to do these jobs. Nonetheless it effortlessly meets my needs. It can without difficultly weld all day on 120volt power no trouble.
The Autoset contains a clever control that sets the welder automatically to the correct settings. Auto-Set gives you an all-in-one MIG, so you won't need to estimate anymore. The 180 Autoset can Weld the thickest material, with the highest output in its class! You can expect to weld up to 5/16 inch in a single pass.
The Autoset may be used in Manual Mode which will provide you the flexibility to set weld parameters for broader applications.
The unit also has a Smooth-Start application which is new addition with patent-pending engineering with offers a smooth, spatter-free start. If you are looking for an incoming level device in the small MIG class, You have found it. No need for Pop-gun starts as they are not required. Also you don't have to concern yourself about cleaning up the spatter.
The perdurable cast aluminum feedhead incorporates two-fold groove quick-change drive roll and spring-loaded tension arm with calibrated tension knob all designed to attain setup easier and faster.
This intellegent little unit also comes with a Thermal overburden protection which shuts down the unit and activates an over temperature light if airflow is blocked or duty cycle is exceeded. Once recovered, it then automatically resets after the fault is rectified and the unit has cooled to an acceptable tempreture.
The Millermatic 180 is the ultimate all in one wire welder. It is able to weld 0.8 to 7.9 mm of mild steel. Armed with the highest output in its class, The Millermatic 180 welds 5/16 in. material in one pass.
To summerize, the Millermatic 180 is a terrific little unit and a steal for the price.
The unit also has a Smooth-Start application which is new addition with patent-pending engineering with offers a smooth, spatter-free start. If you are looking for an incoming level device in the small MIG class, You have found it. No need for Pop-gun starts as they are not required. Also you don't have to concern yourself about cleaning up the spatter.
The perdurable cast aluminum feedhead incorporates two-fold groove quick-change drive roll and spring-loaded tension arm with calibrated tension knob all designed to attain setup easier and faster.
This intellegent little unit also comes with a Thermal overburden protection which shuts down the unit and activates an over temperature light if airflow is blocked or duty cycle is exceeded. Once recovered, it then automatically resets after the fault is rectified and the unit has cooled to an acceptable tempreture.
The Millermatic 180 is the ultimate all in one wire welder. It is able to weld 0.8 to 7.9 mm of mild steel. Armed with the highest output in its class, The Millermatic 180 welds 5/16 in. material in one pass.
To summerize, the Millermatic 180 is a terrific little unit and a steal for the price.
Categories:
Millermatic 180
Millermatic 180
The Millermatic 180 Auto-Set MIG Welder 907312
Rating:
If you prefer you can also add a spool gun which is compatible with this unit. At last you can weld dependably and economically weld aluminum. With the Auto-Set, the Spoolmate 100 Series spool gun will permit you to weld from 18 gauge to 1/4 inch aluminum.
The Millermatic 180 Auto-Set MIG Welder 907312
The Millermatic 180 Auto-Set
General Specifcations:
Input power: Requires 1-Phase power, 230 V, 21.7 A, 60 Hz
Rated output: 135 Amps at 22.5 VDC, 30% Duty Cycle
Welding Amperage Reach: 30 – 180 Amps
Wire pace: 95 – 565 IPM (2.4 – 14.4 m/min)
Net weight: 72 lb (32.7 kg)
WireDiameter Capacity:
.024 – .035 in (0.6 – 0.9 mm) Solid Steel
.024 – .035 in (0.6 – 0.9 mm) Stainless
.030 – .045 in (0.8 – 1.2 mm) Flux Cored
MaxSpoolSize Capability: 8 in (203 mm)
The Millermatic 180 Auto-Set
General Specifcations:
Input power: Requires 1-Phase power, 230 V, 21.7 A, 60 Hz
Rated output: 135 Amps at 22.5 VDC, 30% Duty Cycle
Welding Amperage Reach: 30 – 180 Amps
Wire pace: 95 – 565 IPM (2.4 – 14.4 m/min)
Net weight: 72 lb (32.7 kg)
WireDiameter Capacity:
.024 – .035 in (0.6 – 0.9 mm) Solid Steel
.024 – .035 in (0.6 – 0.9 mm) Stainless
.030 – .045 in (0.8 – 1.2 mm) Flux Cored
MaxSpoolSize Capability: 8 in (203 mm)