Basic Guide to Finding Hidden Valves and Piping

If you are a homeowner then you need to know the details of your home like the back of your hand. It is important to ensure that you are keen as well and are able to know where things like gas piping as well as valves are so that you are able to switch them off in case of an emergency. Below are some of the ways that you can be able to find out where the various valves are located.

If your home has natural gas then the shutoff valves will probably be located just before the gas meter outside the home. Such nubs are usually rectangular in shape and usually use a wrench and gas companies do not recommend touching them. There is however a side valve that is usually located where the gas pipe first enters or much further down the line.

There are high chances that the gas pipes you have are made from flexible copper if you own a modern home and the valves are most likely to be located in the utility room. When you have such a piping system you are usually sure that the gas system that you have usually has a high pressure. With the gas system, you are sure that you will find the shut off valve near the water heater or somewhere near the furnace.

There is a high chance that water valves usually have two shut off valves since one is located before the meter and the other located after the meter. Cold environments usually have the shut off points located in the house so that they do not freeze. The shut off valve is most likely to be located in an underground box or lid next to exterior wall if you live in milder climates.

If you are finding it hard to find the valves then consider looking at property reports that you got at the last phase of the property purchase. It is important to look keenly at the report since it will show you where the valve is located. Pictures of the valves will also be drawn so that you are able to know what they look like.

If you have an automatic sprinkler system then you are going to find that it is hard to locate it since most of them are usually located underground. Since such valves usually have metals then you can easily find them by using a metal detector. If you use a plan to find the valves then you are sure that you are able to easily know where to start.